HS-undernummer 7217 20 Överdragen med zink, dock inte pläterad

Ursprungsland, förmånstull och nästa steg ›

• 7217 20 10 Med ett största tvärmått av mindre än 0,8 mm
• 7217 20 30 Med ett största tvärmått av minst 0,8 mm
• 7217 20 50 Innehållande minst 0,25 viktprocent men mindre än 0,6 viktprocent kol
• 7217 20 90 Innehållande minst 0,6 viktprocent kol

Exempel ur EU:s databas över bindande klassificeringsbesked (BKB/BTI). Beskeden gäller bara för sin innehavare och många har löpt ut — se dem som vägledning, inte som beslut för din vara.

• Metal Nose Bar coated with plastic, Width 3mm, 0.7mm thick. USED IN MANUFACTURE OF FACE MASKS. USED TO ALLOW FACE MASK BE FITTED OVER THE NOSE. METAL COATED WITH HDPE SUPPLIED IN ROLLS

  7217 20 10 · IE 2021 · IEBTI21NT-14-1220-DEC

• ELECTROGALVANIZED SAW WIRE. DIAMETER BETWEEN 0.1 AND 0.35MM. TOLERANCE OF + OR - 1 MICRON.A STEEL WIRE USED IN MACHINES FOR SLICING VARIOUS HIGH VALUE MATERIALS SUCH AS SILICON INTO WAFERS. THE WIRE ITSELF HAS NO CUTTING TEETH.

  7217 20 90 · GB 2020 · GBBTI504836256

• STEEL WIRE. MADE OF LOW CARBON STEEL. LIGHTLY GALVANISED. USED TO MANUFACTURE STEEL MESH, TO CONSTRUCT TEMPORARY FENCE PANELS. CONTAINS LESS THAN 0.25% OF CARBON. WITH A MAXIMUM CROSS-SECTIONAL DIMENSION OF 0.8 MM.

  7217 20 30 · GB 2018 · GBBTI503971158

• ZINC COATED WIRE OF NON ALLOY STEEL - WITH A CROSS SECTION OF >.8MM (RANGE FROM 03.90mm-07.30mm) AND CONTAINING <.10% CARBON BY WEIGHT. GOODS ARRIVE IN COILS APPROX 800KGS BANDED.

  7217 20 30 · IE 2011 · IE11NT-14-213

• WIRE OF NON-ALLOY STEEL COATED IN ALU-ZINC. CROSS SECTIONAL DIMENSIONS VARYING FROM 2.2MM TO 5MM.

  7217 20 30 · IE 2010 · IE10NT-14-156-02

• WIRE MADE OF NON-ALLOY STEEL. COATED WITH ZINC. CROSS SECTIONAL DIMENSION 0.502 mm. CONTAINS BY WEIGHT LESS THAN 0.25% OF CARBON.

  7217 20 10 · GB 2006 · GB114864569

• SINGLE STRAND 2.5MM HIGH TENSILE NON ALLOY WIRE IN ROLLS. COATED WITH ZINC (GALVANISED). CARBON CONTENT BY WEIGHT 0.58 PERCENT . USED FOR FENCING PURPOSES.

  7217 20 50 · GB 2005 · GB114056216